Wheelock MT4-12-LS Guia de Resolução de Problemas descarregar pdf (Página 51)

–51–

46 REPORT FORMAT

(* applies to BOTH primary and secondary numbers)

Determines which format is to be used to report to the central

station.

0 = 3+1; 4+1 ADEMCO Low Speed Standard (this is the default)

1 = 3+1; 4+1 Radionics Standard

2 = 4+2 ADEMCO Low Speed Standard

3 = 4+2 Radionics Standard

6 = 4+2 ADEMCO Express

7 = ADEMCO Contact ID Reporting (* Recommended)

8 = 3+1; 4+1 ADEMCO Low Speed Expanded

9 = 3+1; 4+1 Radionics Expanded

47 SPLIT/DUAL REPORTING

Enter 0 to disable (Backup report only). This is the default.

TO PRIMARY TO SECONDARY

1 = Alarms, Restore, Others

2 = All except Test Test

3 = Alarms, Restore All

4 = All except Test All

5 = All All

49 PERIODIC TEST REPORT

Select the desired test report interval.

0 = none; 1 = 24 hours; 2 = weekly; 3 = 30 days. Default is 24 hrs.

Test Report Code entered in field

64 (or Off-Normal Test Report

*84) is sent. Must be set to "1" for fire installations.

50 SESCOA/RADIONICS SELECT

0 = Radionics (0–9, B–F reporting)

1 = SESCOA (0–9 only reporting)

Select 0 for all other formats. Default is 0.

*56

ZONE ASSIGNMENT/ALARM REPORT CODES

REFER TO THE ZONE ASSIGNMENT TABLE FOR

*56

IN THE

CENTERFOLD PROGRAMMING FORM .

This is an interactive menu mode that is used to program zone

numbers, zone types, and alarm report codes. This mode can also

be used for entering Alpha descriptors for zones (however, we

recommend entering descriptors in menu mode

*82

Upon entering menu mode

*56

, the following is displayed:

Enter Zn Num.

(00 = Quit) 01

Zone 01 entered ↑

Zone Number (Zn): Enter the zone number that you wish to

program (or [0][0] to leave zone programming).

Zn ZT RC

01 09 10

Press [*]. A summary display will come up, showing the status of

that zone's program.

If it is programmed satisfactorily, press [#] to back up one step

and enter another zone number, if desired.

If the zone is not programmed, or you want to change it, press [*].

A prompt for Zone Type will appear.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 75 76

Comentários a estes Manuais

Sem comentários

Wheelock MT4-12-LS Guia de Resolução de Problemas Página 51

Comentários a estes Manuais

Manuais e produtos relacionados com Detetores de fumo Wheelock MT4-12-LS